HDPE Corrugated Duct

Introduction- Aramco 4 Inch COD 5×1 Inch HDPE Subducts

The multi-subduct cable ducting system of Aramco 4 Inch COD 5×1 Inch HDPE Subducts is built to provide safe, and organized pathways for fiber optic, telecom, broadband, communication, and underground cable systems.

The system is based on a 4 inches diameter HDPE COD, which is installed with five HDPE subducts and each having a diameter of 1 inch as mentioned in the specification. The technical description of the unit indicates that for each subduct, there is a pull rope installed internally and a silicon coating applied to the internal surfaces.

In addition, each subduct is coded in five colors – red, green, blue, yellow, and white – facilitating the identification of cable pathways during the installation, maintenance, and upgrading works.

As a result, this integrated construction joins several cable pathways into a one main outer duct and allows the team working on the project to deploy an organized underground cable infrastructure system.

Product Overview- Aramco 4 Inch COD 5×1 Inch HDPE Subducts

The Aramco 4″ Dia COD with built-in 5 x 1″ Dia HDPE subducts serves as an integrated solution to provide an effective delivery service for the cables. Instead of having to install multiple duct lines separately, five separate HDPE subducts are combined in one single COD solution.

Each of these multiple subducts is equipped with its own pull cord. Additionally, the silicon coating applied on the inside of the duct creates favorable conditions for the effective wiring of the cable.

The inner subduct connections are colored differently:

1. Red – Subduct 1
2. Green – Subduct 2
3. Blue – Subduct 3
4. Yellow – Subduct 4
5. White – Subduct 5

Thus, each colored subduct allows the installation crew to easily distinguish among the available solutions to connect the wires and select the right connections.

To conclude, the Aramco 4 Inch COD 5×1 Inch HDPE Subducts solution is a reliable way to organize underground communication networks with multiple subducts installed.

Key Features

1. COD of a 4-Inch Diameter

COD functions as the fundamental outer duct body of the integrated subduct assembly.

2. Five Integrated HDPE Subducts

The structure has five incorporated HDPE subducts which provide individual routes for cable installation.

3. 1-Inch Subduct Design

The item refers to five HDPE subducts with 1-inch diameters forming a series of distinct cable routes in the COD.

4. Pull Rope for Each Subduct

Every subduct has its own pull rope enabling installation to be carried out in different routes.

5. Silicon Coating on Inner Wall

Every internal subduct has a coating of silicon on its internal wall providing a smooth internal surface for easier cable installations.

6. Color-Coded Subducts

The five internal routes are colored red, green, blue, yellow, and white.

7. Multiple Separate Cable Routes

Five independent subducts allow for different cable routes to be maintained in one outer duct system.

8. Well Organized Underground Infrastructure

Integrated structure allows for the creation of a well-organized and recognizable underground cable route.

Technical Specifications

Important Technical Note

The supplied description contains a dimensional inconsistency. It states “ID 4 inch HDPE COD” and “38mm O.D.” for each subduct, while the product name states “5 × 1 inch dia HDPE subducts.” It also mentions “Orange for Outer Duct (110mm)”.

For SEO content, the product name has been retained as provided. Before publishing technical specifications for procurement purposes, the 4-inch COD dimension, 1-inch subduct dimension, 38mm O.D. reference, and 110mm outer-duct reference should be verified against the manufacturer’s approved datasheet.

Other parameters such as wall thickness, exact internal diameter, dimensional tolerances, pull-rope characteristics, silicon-layer properties, coil length, mechanical properties, and operating conditions should also be confirmed from the applicable technical documentation.

Understanding the 5 × 1-Inch Subduct Configuration

The 5 × 1 Inch HDPE Subducts configuration provides five individual cable pathways within the main COD.

The five pathways are color-coded for identification:

This arrangement allows different cables or network sections to be assigned to individual pathways according to the project design

Silicon Layer on Each Subduct

There is a silicon coating on the internal surface of each subduct.

The smoother interior surfaces enhance the movement of the cable during installation. The efficiency of the actual installation process depends on many factors, such as cable design, diameter, length of route, bends, pulling tension, installation means, and method.

Thus, the silicon coating should be regarded as an element of the installation system as a whole and not the only factor influencing the installation efficiency.

Pull Rope in Every Subduct

All five internal subducts come equipped with their own pull rope.

The pull rope serves as a reliable means for the cable installation team to pull cables.

This is useful in the cases of:

– When multiple cables have to be installed in different channels
– When cables have to be laid in different stages of cable installation
– When cables need to be distinguished

It is important to check the pull-rope specification along its maximum pulling capacity prior to installation.

Color-Coded Cable Pathways

The internal subducts are identified using five colors:

Red | Green | Blue | Yellow | White

Color coding provides a simple visual method for distinguishing the individual pathways.

Project teams can assign each color to a particular cable, network section, service, or installation phase according to their approved design.

Color-coded pathways can help:

• Improve installation organization
• Reduce pathway confusion
• Simplify cable identification
• Support maintenance activities
• Improve route documentation
• Assist future cable installation

Where a specific project has an approved cable identification standard, the project’s requirements should take precedence.

Advantages of Aramco 4 Inch COD 5×1 Inch HDPE Subducts

Various Ducts

There are five distinct ducts, each designated for specific cables or network systems.

Integrated Duct System

Several ducts are fused into a unified COD system, thus establishing an optimal underground duct route.

Separate Pull Rope

Each duct has its own pull rope designed for successful and independent cable installations.

Colored Ducts

Using five different colors makes it easier to tell apart the various ducts during installation and operation.

Silicon-Coated Inner Surface

The silicon coating on the inner wall serves the purpose of facilitating the cable installation process.

Better Cable Arrangement

Dedicated ducts ensure individual wires instead of the need for multiple cables running together.

Room for Expansion

According to the design of the plan and available resources, the extra ducts can be used for further cable installations.

Easier Maintenance

Colored ducts allow for quick identification of cables in the event of maintenance, designing upgrades, or installation expansion.

Applications

The configuration of Aramco four inches COD 5×1 inches HDPE subducts can be utilized in different underground cable network projects.

Fiber Optic Cable Networks

The subducts can provide separate cable lines of fiber optics as long as the dimension of the supplied cable is suitable for this purpose.

Telecom Infrastructure

The multi-subduct structure can set structured telecommunication underground routes, with multiple cables.

Broadband Networks

The product is also applicable to the broadband cable underground infrastructure that needs cord separating lines.

FTTx Networks

The five routes can be utilized according to the cable needs and the network type.

Communication Infrastructure

The special subducts can be used in data and communication cabling where the route removing is needed.

Major Infrastructure Projects

The multi-subduct COD solution can be used in big infrastructure projects requiring constructed cable lines.

Conclusion

The Aramco 4″ Dia COD with Built-In 5 × 1″ Dia HDPE Subducts is a multi-pathway cable ducting solution designed to organize and protect multiple underground cable routes within a consolidated COD configuration.

The Aramco 4 Inch COD 5×1 Inch HDPE Subducts system is specified with five built-in HDPE subducts, each with its own pull rope and silicon layer on the inner wall. The internal pathways are color-coded red, green, blue, yellow, and white, supporting clear pathway identification during installation and maintenance.

This configuration can be considered for fiber optic, telecom, broadband, FTTx, communication, and other underground cable infrastructure applications where multiple dedicated pathways are required.

Before procurement or installation, all dimensional information should be verified against the manufacturer’s technical documentation, particularly because the supplied description contains references to both 1-inch subducts / 38mm O.D. and an 110mm outer duct alongside the stated 4-inch COD product name.

Frequently Asked Questions (FAQ)

1. What is the Aramco 4 Inch COD 5×1 Inch HDPE Subducts?

It is a multi-subduct cable duct system identified as a 4-inch diameter COD containing five built-in HDPE subducts, specified in the product name as 1 inch in diameter.

2. How many subducts are included?

The product contains five built-in HDPE subducts, providing five separate cable pathways.

3. What colors are the five subducts?

The five subducts are red, green, blue, yellow, and white, according to the supplied product description.

4. Does each subduct have a pull rope?

Yes. The supplied specification states that each subduct has its own pull rope.

5. Does each subduct have a silicon layer?

Yes. A silicon layer is specified on the inner wall of each subduct, providing a smoother internal surface intended to facilitate cable installation.

6. What is the size of the internal subducts?

The product name specifies five 1-inch diameter HDPE subducts. However, the supplied description also states 38mm O.D. for each subduct. The final dimensional specification should therefore be confirmed from the manufacturer’s datasheet.

7. What are the main applications of this COD system?

The product can be considered for fiber optic, telecom, broadband, FTTx, communication, and underground cable infrastructure applications.

8. What is the advantage of having five built-in subducts?

Five individual subducts provide separate cable pathways within one outer duct, helping improve cable organization, pathway identification, installation management, and future network planning.

9. Why are the subducts color-coded?

The red, green, blue, yellow, and white colors make individual pathways easier to identify during installation, maintenance, cable allocation, and future network expansion.

10. What should be verified before purchasing this product?

Buyers should verify the COD diameter, subduct dimensions, 38mm O.D. reference, pull-rope specification, silicon layer, wall thickness, internal diameter, cable compatibility, delivery length, and applicable project requirements before procurement.

Details